When you choose to spray Mil-Spec Liner on your truck, your investment is not only safe but tested in very extreme conditions. Mil-Spec has been used and tested on race and chase vehicles in the prestigious Baja 1000 and in subzero conditions only found in the wilderness of Alaska.
Mil-Spec protects critical components on vehicles to survive impacts from rocks, debris, and extreme use only found in these types of terrains.
Mil-Spec high tensile strength material provides a superior layer of protection our competitors cannot match. Using a high-pressure system, to achieve this unique strength distinguishes our product from other bed liner companies.
Other spray-on bed liner companies use a low-pressure system that produces a softer bed liner that often is more susceptible to material failure resulting in gouging or even tears.
Mil-Spec prides itself on using higher quality raw materials to produce a fine grain texture that does not “clump” or “sag” on vertical surfaces. Mil-Spec looks as if it came pre-installed from the vehicle manufacturer.
Mil-Spec provides a permanent bond that conforms to every contour of your truck bed. This bond creates a barrier from moisture, rust, and corrosion for the lifetime of your vehicle. Mil-Spec is resistant to most chemicals making it a superior material for use in industrial applications.
We will apply a protective masking to ensure that your vehicle is protected from any bed liner overspray. Once that protection is installed, we proceed with the actual material spray coating:
Unlike other spray-on or drop-in bedliners, a Mil-Spec treatment is professionally applied at high pressure and high temperatures, bonding instantly and permanently to your truck. Made from a two-part polyurethane elastomer system, Mil-Spec uses equal parts of an “A” component, or hardener, and a “B” component, or resin. Using special equipment, the two liquids are combined to create a polyurethane elastomer with tough, durable, protective properties.
Mil-Spec dries in just 3 seconds, preventing runs or pooling that can occur with a cold, low-pressure spray-on product.
With a pre-scheduled appointment, the total job (including bed preparation, masking, and spraying) will take a few hours depending on the size of the area. For best results, we recommend waiting a full 24 hours before putting your new Mil-Spec to the test.
Mil-Spec’s rich history in protective coatings validates its commitment to producing the highest quality coating on the market today. Mil-Spec is not only tested in laboratory conditions but utilizes the harshest outdoor conditions possible.
Behind Mil-Spec stands Burtin Polymer Laboratories (BPL), one of the foremost authorities in the research, development, and commercialization of polyurethane systems produced for commercial roofing, commercial and residential insulation, flotation, adhesives, packaging, spray elastomers, and custom molding products.
Recently launched, its Mil-Spec products are primarily used for pickup truck beds, tailgates, wheel wells, and other similar vehicle protection applications.
BPL continues to develop some of the very few blast mitigation products tested and approved by the US Military and utilized by the United States government in the refurbishment of the Pentagon after the 9/11 attacks.
All Burtin Polymer Labs formulas are proprietary where strict quality controls are implemented using only the finest chemical ingredients and the most sophisticated processing equipment in the industry at their 14-acre, state-of-the-science facility in Orange County, Georgia with warehousing and service operations located in seven States.
Mil-Spec’s rich history in protective coatings validates its commitment to producing the highest quality coating on the market today. Mil-Spec Liner is not only tested in laboratory conditions but utilizes the harshest outdoor conditions possible. All of our liners carry a Lifetime Warranty against warping, cracking, chipping, peeling, or coming off your bed in any way.
Mil-Spec’s price starts as low as $400 per bed.
Details are important to us, and we are definitely not one to rush the process. Most trucks start to finish, take about 4 hours to complete. The more custom the job, the more time is required. Our unique application process means the bed liner material dries and hardens in 3-5 seconds after leaving the gun. That means your truck is dry when it leaves the store and can see “light duty” service almost immediately, however in the interest of “protecting what you love”, we recommend you refrain from “heavy use” for the first 24 hours.
Yes, in most cases you may have a hard time telling where the damage was.
Absolutely! Check with your local dealer(s) and verify they offer the BULLET MAGNUM SERIES line of products.
All of our Mil-Spec liners carry a Lifetime Warranty against warping, cracking, chipping, peeling, or coming off your bed in any way—we aren’t satisfied until you are.
The list is endless. Almost anything you might want a thick, tough, durable coating on can be considered. Bullet Liner Orange County operates in 1,500 square feet of warehouse space and a state-of-the-art, medium-sized spray booth—which means there is almost no job we can’t handle. From lifted trucks to trailers, midsize commercial vehicles, ATVs, or RVs —we’ve got you covered. Bullet Liner adheres to concrete, foam, wood, fiberglass, steel, and other products found in everyday life.
"Top-notch product and application process. We've compared it to Linex and Rhino Liner, the way the bed liner sticks and holds up to wear and tear is great in the long term. Texture is finer and it doesn't need to be overly thick in order to have the same strength as its competitors. Cost wise, the lack of franchise fees end up helping the customer in the end. We've had nothing but happy customers by applying their spray bed liner."
"Mil-Spec has been awesome to work with. The guys are there for any questions we have. We also appreciate their effort to help with our local marketing. Best bedliner out there!! Thanks guys for all your hard work."
"Mil-Spec spray in bed liner is one of the nicest and most clean looking bed liners on the market! I was using another product before my work switched, and I’m so glad we did! Phillip who works for Mil-Spec is the best guy to work with, on top of ordering material to give tech advice over the phone. So glad I was able to be trained the best in the business! You won’t regret spraying Mil-Spec bed liners!"
"The guys at Mil-Spec, Steele, Hunter, and Phillip are fantastic to work with. They know what Customer Service is all about and they take care of their customers. I would recommend their spray on bedliner system to anyone!"